Table of Contents
Does OneTouch Ultra have an app?
The OneTouch Reveal® mobile app has helped over one million people take a step forward in their diabetes management.
How do I connect my One Touch Ultra 2 to my computer?
Connect the OneTouch® Interface Cable to the COM or USB port on your computer. Make sure the meter is turned off. If you insert the cable while the meter is already on, the meter will not respond to computer commands. Then connect the other end of the OneTouch® Interface Cable to the meter data port.
How do I connect my One Touch Verio to my computer?
You will need a standard micro USB interface cable to connect your OneTouch Verio Reflect® Meter to a computer to download results (not included). Once the command to start the download is sent from the computer to the meter, the Cable Connected screen will appear, indicating that the meter is in communication mode.
How do I download data from One Touch Ultra 2?
Uploading your OneTouch Ultra 2 Meter
- Connect Your Device. Using your FTDI cable, connect your meter to one of your computer’s USB ports.
- Upload Your Data. Launch the Tidepool Uploader and log in to your account. Confirm “OneTouch Ultra 2” is one of your Devices.
What is the OneTouch Reveal app?
The OneTouch Reveal® web app is a web-based diabetes management system that makes blood sugar management simple and easy, on your PC or Mac computer. The OneTouch Reveal® mobile app makes it easy to view and track your results on your iOS or Android smartphone or tablet.
How does squeezing finger affect blood sugar?
Anywhere from 5 to 13 percent of study participants had a significantly different blood sugar result (versus no squeezing), depending on how much pressure they put on the finger. On average, blood sugar readings were lower when people put pressure on the finger.
How do you turn on a One Touch Ultra 2?
Turning your meter on To perform a test, insert a test strip as far as it will go. The meter will briefly perform system checks, then the display will turn on. or, With the meter turned off, press and hold for two seconds to access MAIN MENU.
How do I sync my OneTouch to the app?
- Step 1: Configure the OneTouch Reveal app. From the OneTouch Reveal app on your mobile device: Tap More. Tap Connections. Toggle AppleHealth to green (enabled).
- Step 2: Connect your Apple Health account to Glooko. From the Glooko mobile app: Tap. Sync at the top-right of your screen.
How do I download data from OneTouch?
Install Data Transfer Tool • Unplug all OneTouch® USB cables from your computer • Sign In to your OneTouch Reveal® account and click help from the top right of any screen • Click the Download button under Data Transfer Tool and follow the prompts • Select the appropriate devices • Click Finish.
What should my blood sugar be?
What Are Normal Blood Sugar Levels? They’re less than 100 mg/dL after not eating (fasting) for at least 8 hours. And they’re less than 140 mg/dL 2 hours after eating. During the day, levels tend to be at their lowest just before meals.
What does error 2 mean on OneTouch Ultra?
You may also get a test strip error if the test strip was moved during testing. Do not move or wiggle the test strip once it’s inserted in the meter. Keep in mind that each meter has its own indication for the test strip error. For example OneTouch meters indicate test strip error by displaying “Er 2”.
What are OneTouch Ultra products used for?
OneTouch® Ultra®2 – Product Guide
How can you get free test strips for OneTouch?
Free meter: OneTouch Verio IQ – Check whether You qualify to get it free here.
How to use One Touch Ultra?
• Use only OneTouch® Ultra® Test Strips with your OneTouch® UltraMini® Meter. • Make sure your meter and test strips are about the same temperature before you test. • Testing must be done within the operating temperature range (43–111°F).