How do I reset my Hunter fan thermostat?

How do I reset my Hunter fan thermostat?

You can reset them all at the same time using the reset button.

  1. Open the faceplate on the Hunter thermostat.
  2. Twist a paper clip so one of the ends is sticking out.
  3. Press the end of the paper clip into the “Reset” pinhole and hold it for two seconds to clear the programming.

How do you reprogram a hunter thermostat?

Hold down one of the UP/DOWN arrow keys until the display flashes. Use the arrow keys to move the temperature setting to the desired temperature. Press the HOLD/RETURN button. The thermostat will now hold the temperature at the setting until the override is cancelled.

What does a flashing 4 mean on a Hunter thermostat?

4. Indicates if the fan is set to Auto or On modes. 5. Allows you to switch between Heat, Cool, and Off modes.

How do you change the battery in a hunter thermostat?

How do I Replace a Hunter Douglas Thermostat Battery?

  1. Lift the front cover of the thermostat upward.
  2. Push the battery release latch inward and upward to remove the battery housing unit cover.
  3. Insert two AA 1.5-volt batteries.
  4. Slide the battery housing unit cover over the batteries and back into position.

What does Reco mean on a Hunter thermostat?

Recovery mode happens when your thermostat is trying to get your HVAC system to reach a desired temperature. Therefore, if your HVAC system is not running as it should, it may be a sign that your air conditioner or heater is not able to keep your house as cold or warm as you want.

What does AUX heat on thermostat mean?

auxiliary heat
“Aux” is short for auxiliary heat. If a heat pump is having a difficult time coming up to a certain temperature quickly due to extremely cold outdoor temperatures, the “aux heat” indicator means that a secondary heat source (generally gas or electric) has been deployed.

What does filter mean on thermostat?

You look up and see a blinking light on your thermostat, “CHANGE FILTER.” Don’t ignore it! These filters protect your indoor air quality, meaning, they keep you and your family healthy! And by keeping them clean, it will save you money on heating and air conditioning in the long run.

How do I know if my thermostat battery is bad?

The most obvious sign that you need to change your thermostat batteries is when the thermostat literally tells you the batteries are about to die! Most programmable models will now flash a low battery warning, usually about a month or two before the battery completely dies.

Why is my Hunter thermostat manual wrong?

The wrong manual means incorrect info regarding wiring, installation, etc. As far as the information contained with Hunter thermostat manuals is concerned, you can choose to flip to the relevant heading by checking out the extensive Table of Contents (ToC). From the ToC, you’ll be able to locate heading that deal with different issues such as :

How do I flip through a hunter thermostat manual?

As far as the information contained with Hunter thermostat manuals is concerned, you can choose to flip to the relevant heading by checking out the extensive Table of Contents (ToC). From the ToC, you’ll be able to locate heading that deal with different issues such as :

Will my Hunter thermostat last for years?

Congratulations! Your new Hunter thermostat will provide years of reliable service. By saving energy, your thermo-stat will pay for itself during its first season of use. Thank you for buying a Hunter product! Please read this manual for complete instructions on installing and operating your thermostat.

What is model number 44260?

® Programmable Thermostat Owners Manual Model 44260… (35˚C), and automatically cut-off in Cool mode if the temperature drops below 40˚F (4˚C). 3. Compressor Protection This thermostat provides a 3.5 minute delay after shutting off the cooling system before it can be restarted.