How do you open a SentrySafe if you forgot the combination?

How do you open a SentrySafe if you forgot the combination?

How To Break Into A Sentry Safe | Helpful Legal Hacks

  1. Contact Sentry Safe for assistance or call them at 800-828-1438. (Best for safes over $100.)
  2. Call a local locksmith.
  3. Use a high powered magnet to trip the lock.
  4. Use a nail file.
  5. Use a paper clip.
  6. Other destructive means like using a drill.

What is the SentrySafe factory code?

Before we begin, locate the 5-digit factory code located on the back of your owner’s manual, and enter the code to open the door. This safe is set to “62044.” To program the primary-user code, press the [P] button and enter the 5-digit factory code on the electronic keypad.

Do all Sentry safes have the same code?

No. All Sentry safes are keyed different.

How do I find my SentrySafe model number?

The serial number can be found on a label adhered to the front of your unit or inside on the door. Note: Be sure to enter all of the information, including any letters preceding the number and the asterisk at the end.

Can you change the factory code on a SentrySafe?

The SentrySafe fire safes have three codes associated with the electronic lock and keypad. The first is the factory code. This five-digit code is located on the back of your manual. It can never be deleted or changed and will always open your safe, so keep the manual and this code in a secure place.

How do I reset my electronic safe code?

Place the electronic digital safe into code reset mode. On some models you need to hold the last digit of the code or press the “*” button to get into code reset mode. Other safes require you to open them and press a small red button on the inside of the door.

How do you reset your digital safe if you forgot the code?

Press the reset button on the inner keypad of the safe. It should be a small, black button with the word “Reset” next to it. Push the button with the end of the hanger. You may hear a beeping sound or the control panel may light up when you press the reset button.

How do I reset my sandleford safe code?

Press the reset button. The display should read “RESET”. The master code will now have reset to the preset master code – 000000 . Press “LOCK” to confirm.

How do I unlock my sandleford electronic safe?

Turn door handle clockwise and pull the door open. 4. Insert 4 x AA batteries into the battery compartment, it is best to use heavy duty alkaline AA batteries. Using your safe You will now be able to unlock and open your safe using your own user code.

How do you open a digital safe when the batteries are dead and no key?

The battery pack is inside the door and batteries can only be replaced with the safe open. To access the override lock, there is usually a removable panel to the side of the keypad. Undoing this will uncover the lock for the key to be inserted. If you have lost the override key then you cannot open the safe.