How do you write a list of figures?

Table of Contents

How do you write a list of figures?

GENERAL INSTRUCTIONS

  1. Lower case Roman Number (iii), centered, bottom of page.
  2. Margins: Left margin 1.5 inch.
  3. Font: 12 pt.
  4. Title: LIST OF FIGURES — ALL CAPS, bold, centered on first line.
  5. On the next line, change the justification to Justify.
  6. Use RegText to type these two words: Figure Page.

How do I start page numbers on a different page?

Start page numbering later in your document

  1. Go to Insert > Header or Footer > Edit Header or Edit Footer.
  2. Select Different First Page.
  3. In the header or footer area, you should see a label on the first page that says First Page Header.
  4. Select Close Header and Footer or press Esc to exit.

Should page numbers start on cover page?

Though the APA Style rules ask for page numbering to start on the title page, a common academic convention is to include the title page in the total page count but start the numbering on page two. Publication manual of the American Psychological Association (6th ed.).

Where do you put page numbers?

To add page numbers to your Word document, switch over to the “Insert” tab on the Ribbon and then click the “Page Number” button in the “Header & Footer” section. A drop-down menu shows several different options for where you’d like the page numbers to appear—top of the page, bottom of the page, and so on.

How do I start page numbers on page 2 in Google Docs?

How to Start Page Numbering on Page 2

  1. Select Insert > Header & page number > Page number.
  2. Choose to add page numbers to the header of every page except the first page or to add page numbers to the footer of every page except the first page.

How do I link a table of contents in Word?

To create a combined list of tables and figures

  1. After the table of contents, click where you want to insert the list.
  2. In the Insert menu, pull down to Index and Tables.
  3. Click Table of Figures.
  4. Check Include label and number, Show page numbers, Right align page numbers.
  5. Click Options.
  6. Click OK.
  7. Click OK.

How do I link a table of contents to a PDF in pages?

Start the Adobe® Acrobat® application and open a PDF document using “File > Open…” from the main menu. Select “Plug-Ins > Links > Generate Links > Link Table of Contents To Pages…” to open the “Create Links For Table of Contents” dialog.

How do you add page numbers to Table of Contents?

5. Insert a page number with table of contents formatting at the bottom of the table of contents page….Create the table of contents.

  1. Put your cursor under the words “TABLE OF CONTENTS” that you typed.
  2. Choose “insert” from the menu, and then choose “reference”. (
  3. Click on the “table of contents” tab.
  4. Click on OK.

How do I start page numbers after a table of contents in Word?

Click Page Number > Format Page Numbers to open the Page Number Format dialog box.

  1. To start numbering with 1, click Start at, and type 1 (otherwise, Word will automatically apply the actual page number).
  2. When you’re done, click Close Header and Footer or double-click anywhere outside the header or footer area.

What page should page numbers start?

On the first page of Chapter 1 (or your main body text), numbering should start with the Arabic numeral “1” and continue, consecutively, for the remainder of your document.

Why are page numbers not showing on all pages in Word?

Scroll to the first page of your Table of Contents. If you’re not in the Header and Footer view, select the Insert tab, click Footer and click Edit Footer. If no page number is displayed, insert it: Click Page Number, then Bottom of Page, then Plain Number 2 (centered) or Plain Number 3 (right-justified).

How do I make a table of contents not Page 1?

Take the following steps to exclude your Table of Authorities pages from the document page numbering:

  1. Place your cursor on the first line of page you want to be page 1.
  2. Click Layout in the Word ribbon.
  3. Click Breaks.
  4. Click Next Page.
  5. Double click on the header area of page 1.
  6. Click Link to Previous in the Design ribbon.

How do you reference a figure in Word?

Place the mouse cursor to where you want to insert the figure number. Click on “Insert” -> “Reference” -> “Cross-reference”. In the dialog box, select “Figure” as “Reference type”, then select “Only label and number”, pick “Figure 1 …”, click “Insert”. Now, we have Figure inserted in the text.

How do you hyperlink back to a table of contents?

In other words, you click the hyperlink to the heading, do some reading or work at the heading, then press Shift+F5, and Word jumps back to the TOC.

How do I start a footer on page 2?

Go to the “Page Layout” tab, click “Breaks” and then click “Next Page” under “Section Breaks.” 2 Go to the “Insert” tab and select either “Header” or “Footer” from the “Header and Footer” section, depending on where you want to insert page numbers.

How do you set up a table of contents in Word 2010?

In the References ribbon, choose Table of Contents, then choose Custom Table of Contents (or Insert Table of Contents in Word 2010). Click on the Options button. Your Appendix Heading style should show up in the Available Styles list.

Does table of contents have page number?

Matter preceding the table of contents is generally not listed there. However, all pages except the outside cover are counted, and the table of contents is often numbered with a lowercase Roman numeral page number.

How do I turn on page numbers in Word?

Select Insert > Page Number, and then choose the location and style you want. If you don’t want a page number to appear on the first page, select Different First Page. If you want numbering to start with 1 on the second page, go to Page Number > Format Page Numbers, and set Start at to 0.

How do I edit a table of figures?

Here’s one way: On the References tab, click Insert Table of Figures. Click the Modify button. In the Style dialog, click Modify again, and make the desired changes. When you are done, click OK until you are back in the Table of Figures dialog box.

What is a table of figures in a report?

In addition to the Table of Contents, a Table of Figures and Tables is usually required in a report. It is situated immediately after the Table of Contents. It contains a list of figures, statistical tables, diagrams and graphs, including their titles.

Does table of contents come before introduction?

The table of contents is found on a page right at the beginning of an academic writing project. It comes specifically after the title page and acknowledgements, but before the introductory page of a writing project.

What is a table of contents definition?

A table of contents, usually headed simply Contents and abbreviated informally as TOC, is a list, usually found on a page before the start of a written work, of its chapter or section titles or brief descriptions with their commencing page numbers.

Which of the following is used by Word to generate a table of contents automatically?

Create the table of contents

  • Click where you want to insert the table of contents – usually near the beginning of a document.
  • Click References > Table of Contents and then choose an Automatic Table of Contents style from the list.

Is a table an illustration?

In technical writing, there are two types of illustrations: figures and tables. Anything that is not a table is considered a figure—no matter what form it takes. Figures include drawings, graphs/charts, photographs, maps, etc. Technical writers differ in their use of terminology for illustrations.

Which comes first list of tables or list of figures?

If even one numbered table or figure appears in your manuscript, then a List of Tables and/or a List of Figures must be included in your manuscript following the Table of Contents. If both are used, arrange the List of Tables before the List of Figures.

How do you make a list of figures in a report?

  1. After the list of tables, type the heading List of Figures, assign the Heading 1 style, and click where you want to insert the list.
  2. In the Insert menu, pull down to Index and Tables.
  3. Click Table of Figures.
  4. Check Include label and number, Show page numbers, Right align page numbers.
  5. Click Options on right.

Where should a list of figures go?

The List of illustrations will come after the Contents page (on a separate page) and before the Introduction. This page should list the name of each figure of illustration that is included in the body of your dissertation or thesis and then give the number of the page that it appears on.

How do I change the font of a table of figures?

Select the Home tab in the ribbon (see figure 1). Select all or part of the table title or figure caption text that you want to change. Use the options in the Font and Paragraph groups to select new style options, just as you would regular body text.

How do you name a table in thesis?

Tables must be numbered consecutively using Arabic numbers throughout the thesis, as should figures, examples, and illustrations. Each table in a thesis must have a caption that tells concisely what it contains. The caption must be placed above a table.

What is a list of figures?

The list of figures identifies the titles and locations of visuals (figures, drawings, photos, maps) in administrative or research documents. Articles in periodicals do not use lists of figures. Figures concentrate information in unusual ways and show critical details, configurations, and evidence.

How do you add a list of figures to a table of contents in latex?

So you can easy use \section{Abbildungsverzeichnis} to insert the list in your table of contents.

How do you label figures in a thesis?

SHSU Guidelines:

  1. Figures must appear in the text as near as possible to the discussion relating to them.
  2. DO NOT insert a table in the middle of a sentence.
  3. Figures must be numbered consecutively using Arabic numbers throughout the thesis, as should tables, examples, and illustrations.

How do I sort table of contents?

If you have used Heading styles in your document, creating an automatic table of contents is easy.

  1. Place your cursor where you want your table of contents to be.
  2. On the References Ribbon, in the Table of Contents Group, click on the arrow next to the Table of Contents icon, and select Custom Table of Contents.

How do I edit a table of contents in Word?

Format the text in your table of contents

  1. Go to References > Table of Contents > Insert Table of Contents.
  2. Select Modify.
  3. In the Styles list, click the level that you want to change and then click Modify.
  4. In the Modify Style pane make your changes.
  5. Select OK to save changes.

How do I align a list of figures in Word?

Click anywhere inside the list. From the Numbering dropdown (in the Paragraph group), choose Define New Number Format (at the bottom). In the resulting dialog, change the Alignment setting from Left to Right, as shown in Figure G. Click OK to see the newly aligned list shown in Figure H.

Should list of figures be in table of contents?

The list of figures and list of tables, if used, are included (see the Table of Contents in this handbook for a sample using numbered chapters; see Figures 2.6, 2.7, and 2.8 for additional options). All chapters or titled sections and all first-level subheadings of the manuscript are listed in the table of contents.