How many BTUs does Douglas fir burn?

How many BTUs does Douglas fir burn?

Douglas fir produces approximately 26.5 million BTU’s per cord.

What firewood puts out the most BTUs?

Which Types of Firewood Burn The Hottest?

  • Osage orange, 32.9 BTUs per cord.
  • Shagbark hickory, 27.7 BTUs per cord.
  • Eastern hornbeam, 27.1 BTUs per cord.
  • Black birch, 26.8 BTUs per cord.
  • Black locust, 26.8 BTUs per cord.
  • Blue beech, 26.8 BTUs per cord.
  • Ironwood, 26.8 BTUs per cord.
  • Bitternut hickory, 26.5 BTUs per cord.

Does Douglas fir make good firewood?

Fir. Probably the best conifer for firewood, Douglas Fir has a medium heating value and does not produce too much ash. Older trees are easy to split and easy to start. Fir does produce a moderate amount of sparking.

How many Btu are in a cord of firewood?

As you can see from the chart below, the famed red oak is not the highest on the list. It is surpassed by 13 other varieties that have as much as 37% more BTUs per cord!…BTU Values of Wood Species.

Wood Species Pounds / cord Million BTU’s per cord
Maple, Sugar 3,757 24
Oak, Red 3,757 24
Ash, White 3,689 23.6
Birch, Yellow 3,689 23.6

What kind of wood burns the hottest?

The hottest burning wood is Hardwood. Hardwoods like ash, birch, oak, maple, and most fruit trees are the best burning woods that will give you the hottest and longest burning time. These woods have sap, pitch and are cleaner to handle than the softwoods.

What wood burns best in fireplace?

Hardwoods such as maple, oak, ash, birch, and most fruit trees are the best burning woods that will give you a hotter and longer burn time. These woods have the least pitch and sap and are generally cleaner to handle.

Which wood is best for burning?

What are the disadvantages of Douglas fir?

Cons. Like all softwoods, one issue that can be a negative is that the Douglas Fir wood is, as the softwood name implies, softer than hardwoods. This can mean that the wood can be more easily damaged, so care must be taken in milling, handling, and transporting the lumber.

What wood is hardest burning?

Oak is a very dense hardwood tree, so it will burn for a very long time. Getting it started can be the tricky part, though. Because oak is a dense wood, it requires continuous high heat to get it started burning and to keep it burning well….Hours of Operations.

Monday 24/7
Saturday 24/7
Sunday 24/7

How many BTUs is oak?

TABLE 1. Firewood Facts (Sorry for any gaps in the data)

Species Weight (lbs./ Cord) Green Heat per Cord (Million BTUs)
Oak, Gambel 30.7
Oak, Red 4888 24.6
Oak, White 5573 29.1
Osage-orange 5120 32.9

What wood should you not burn?

Watch out for any wood covered with vines. Burning poison ivy, poison sumac, poison oak, or pretty much anything else with “poison” in the name releases the irritant oil urushiol into the smoke. Breathing it in can cause lung irritation and severe allergic respiratory problems, the Centers for Disease Control state.

Is Douglas fir good for firewood?

Douglas fir firewood is arguably one of the most popular softwoods to burn especially if you live in an area where these trees are abundant. Let’s face it, everyone would love to burn seasoned oak, madrone, maple or some other popular hardwood but these trees don’t grow everywhere.

What is the BTU of firewood?

Firewood BTU of Western Softwood Species Species Million BTU’s per Cord Pounds Per Cord Green Pounds Per Cord Dry Douglas Fir 26.5 5050 3075 Western Juniper 26.4 5410 3050 Western Hemlock 24.4 5730 2830 Port Orford Cedar 23.4 4370 2700 Lodgepole Pine 22.3 4270 2580 Ponderosa Pine 21.7 4270 2520 Jeffery Pine 21.7 4270 2520 Sitka Spruce 21.7 4100

Is Doug Fir stronger and harder than other hardwood?

Doug Fir has more Btu/cord than many hardwoods. Of course it is stronger and harder than many “hardwoods”. I looks like most of the Western Softwoods have about 8,600 Btu/lb dry while the Hardwoods are about 7,500 Btu/lb.

What is the difference between a Douglas fir and a pine tree?

On a fir tree, the needles attach to the branches individually, while on a pine, they attach in clusters. On a Douglas fir, the needles protrude from all directions like the needles on a bottle brush. They are soft and have cones that dangle straight down rather than being positioned upright on a branch.