What is Heldite?
Heldite is a thick liquid compound that can be applied to any joint either with or without a gasket. It will effectively seal bolted, flanged or screwed joints and as it is in a liquid form it is economical to use and does not tend to squeeze out into the interior of a joint and cause damage.
What is fernox jointing compound?
Product Code: 61025. Hawk White is a pipe jointing compound for use in general applications. It is suitable for Natural Gas, non potable water, steam, air (excluding medical lines) brine, alcohol and L.P. Gas. It is ideal for use on pipe diameters up to 25mm and with reinforcement fibre on pipework over 25mm.
What jointing compound for oil?
Heldite Jointing Compound
Heldite Jointing Compound is a high performance sealant for preventing leakage of Petrol, Diesel Fuel, Hydraulic Fluids, Oils, Paraffin, LPG’s, Water, Steam and Gases in all branches of Automotive, Auto mechanical, Electrical and General Engineering, Plumbing, Heating and Pipeline Service.
What is potable water jointing compound?
Heldite H2OK is a silicone-based jointing compound that does not support microbiological growth and is compatible with most metals, plastics and rubber.
How do I use hylomar blue?
Hylomar Universal Blue should be applied to clean dry surfaces. Apply a thin film or bead to one or both surfaces. Once applied, sufficient time should be allowed for the solvent to evaporate. Unlimited assembly time allows precise alignment of joints to be made.
Can I use PTFE and jointing compound together?
Use jointing compound too The combination of the PTFE and the compound really helps to enable that the joints will not leak. Most plumbers will recommend using the PTFE tape and jointing compound on any new heating installation.
Does fernox jointing compound set hard?
Fernox LS-X jointing compound and external leak sealer is ideal for use on compression joints and screwed fittings, as it never sets rock hard, joints can easily be undone. Ready to use without mixing.
Can you use solder joints on oil pipe?
Oil supply lines are normally run in plastic coated annealed copper and some approved types of plastic pipe. Soft soldered fittings cannot be used, nor can galvanised fittings as they can cause electrolytic corrosions of dissimilar metals.
What is boss white jointing compound?
Boss White is well known as a non-poisonous pipe jointing compound which is clean and easy to apply. It acts as a lubricant whilst the joint is being assembled and tightened and does not set hard enabling easy dismantling for subsequent alterations to the pipework. Boss White conforms to BS6956 Part 5, 1992.
What is hylomar sealant?
Hylomar Universal Blue is a polyester urethane based viscous putty blended with a solvent to make it easy to apply, whether pumped, applied in a tube, or sprayed in an aerosol. A non-setting sealant, it doesn’t harden, even at 250°C.
What is hylomar universal blue?
Hylomar Universal Blue is a high performance, non-setting gasket and jointing compound. The compound is resistant to a wide range of fluids including: Industrial fluids. Oils. Petroleum and synthetic diester lubricating oils.
What makes heldite sealants unique?
The combination of thermal, plastic and adhesive factors in Heldite is unique in sealant formulation. Plasticity combats the effects of temperature and pressure changes, shifting levels and stresses associated with the assembly of dissimilar metals such as aluminium housings bolted to cast blocks.
Is heldite waterproof?
Heldite is completely waterproof and unaffected by Sea Water. The product is widely used for protecting electrical joint boxes and moisture sensitive instruments from the effect of damp atmosphere. Heldite has no adverse effect on metals, rubber or other materials with which it is in contact.
What is heldite used for?
The product is widely used for protecting electrical joint boxes and moisture sensitive instruments from the effect of damp atmosphere. Heldite has no adverse effect on metals, rubber or other materials with which it is in contact.
What is heldite jointing compound?
Heldite Jointing Compound is a pipe and thread sealant designed to effectively seal bolted, flanged or screwed joins and prevent leakage. This semi-permanent liquid compound is used throughout all engineering industries and in plumbing and heating, provided it isn’t in contact with potable water.