What is the best tool for digging post holes?

What is the best tool for digging post holes?

You can use a post hole digger or power auger to dig the hole. A post hole digger is a manual tool and will get the job done in average soil. If you have hard, rocky soil or a lot of roots – you may want to opt for a power auger.

Is a post hole digger worth it?

While that won’t make a lot of difference if you have loamy, soft soil to begin with, for those who have hard-packed clay soils it certainly does. If your soil is very solid, or has a lot of rocks, a post hole digger is an essential tool to have.

What is the difference between an auger and a post hole digger?

Q: What is the difference between an auger and a post hole digger? The difference between the two is in how they dig holes. You thrust a traditional post hole digger into the ground and remove the soil between the scoops. An auger “screws” into the ground and transports dirt along the blade up to the surface.

How deep can you dig with a post hole auger?

about 3 ft. deep
How Deep Can Power Augers Dig? Most augers dig about 3 ft. deep, but for deeper holes, ask for an extension rod (Photo 5), usually for no extra fee. Deeper holes are typically required for footings for decks or other structures attached to houses located in very cold climates where frost depths exceed 3 ft.

Can I dig a post hole with a shovel?

With the turf removed, a long-handled shovel does a good job of removing the dirt. Dig with the blade plumb and the handle pushed forward to keep the walls of the hole straight up and down.

Does Dewalt make a post hole digger?

Backed by a 5-year limited warranty, this tool is designed to dig post holes in tilled soil. Strength and durability make Razor-Back tools the choice of professionals. This durable post hole digger is perfect for digging post hole and footings in all soil types.

How big of a hole do you need for a 4×4 post?

12 inches
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.

How long does it take to dig a post hole with an auger?

Power augers can dig as many holes in an hour as a post hole digger can dig in eight hours, with hole sizes ranging from 6” diameter holes and up.

What are the different types of post hole digger?

– BEST OVERALL: XtremepowerUS 1200W 1.6HP Electric Post Hole Digger – BEST MANUAL: AMES 2701600 Post Hole Digger – BEST GAS: ECO LLC 52cc 2.4HP Gas Powered Post Hole Digger – BEST ELECTRIC: XtremepowerUS 1500W Electric Post Hole Digger

How to dig a post hole the fast?

Type of concrete and its proper installation. This depends on the application and the climate where you live.

  • Additional costs. For ready-mix concrete delivery,there are typically additional fees for delivery,weekend service,small loads,and overtime for long unloading times.
  • Additional concrete.
  • Allocate enough time.
  • What size post hole digger do I Need?

    The size of the post hole digger that you purchase will largely depend on your fence post size. Generally, it is recommended that you provide yourself with 4 inches of wiggle room. So, if your fence post is 4 inches wide, you should consider an 8-inch post hole digger. This will provide you with enough room to properly set your posts.

    How to use a gas powered post hole digger?

    – Very powerful device. – Durable unit. – Easy to grip and comfortable rubber handles. – It is well protected by a tubular steel cage. – Quality for money. – It does more within a short time. – Digs well tough soil conditions. – Easy to use. Doesn’t take much work to figure out how to use it.