What is truck mounted attenuator?
The truck mounted attenuator (TMA) is a safety apparatus welded or bolted on the rear side of a work truck. The sizes of the TMA vary but most are at least 1.5 meters wide as the purpose is to reduce the impact of an automobile collision.
How does a truck attenuator work?
In the case of a vehicle colliding with the attenuator mounted on the truck, the collision will generate significant G-force. The attenuator absorbs some of this G-force and kinetic energy generated by the collision, reducing the likelihood of serious injury and death.
What is an attenuator in a car?
An impact attenuator, also known as a crash cushion, crash attenuator, or cowboy cushion, is a device intended to reduce the damage to structures, vehicles, and motorists resulting from a motor vehicle collision. Impact attenuators are designed to absorb the colliding vehicle’s kinetic energy.
What does TMA truck stand for?
Truck Mounted Attenuator
WHAT IS A TMA TRUCK? TMA stands for Truck Mounted Attenuator. An attenuator is the kinetic absorption device that absorbs impact when hit. In simple terms, it’s a crash cushion that is mounted to the rear of a safety truck.
What’s the definition of attenuator?
Definition of attenuator : a device for attenuating especially : one for reducing the amplitude of an electrical signal without appreciable distortion.
What are Scorpion traffic devices?
The Scorpion II Truck Mounted Attenuator (TMA) is a mobile crash cushion attached to the rear of a support vehicle’s frame. The TMA may be used on moving shadow trucks, stationary block vehicles, or advanced warning vehicles upstream of a moving or stationary operation.
What does attenuator mean?
What are the scorpion trucks?
The Scorpion TMA Model C folds up and over the bed of flat bed, stake bed, or dump trucks. The Model C with its compact design and balanced weight distribution makes it ideal for high-speed travel. The Scorpion TMA Model C provides TL-3 impact protection. Side mounts are also available.
What are the types of attenuator?
Types of Attenuator
- Fixed Type. In Fixed type attenuators the resistor network is locked at a predetermined attenuation value.
- Step Type. These attenuators are similar to fixed attenuators.
- Continuously Variable Type.
- Programmable Type.
- DC Bias Type.
- DC Blocking Type.
- Optical Attenuators.
What is a scorpion attenuator?
What is a truck mounted attenuator?
The truck mounted attenuator (TMA) is a safety apparatus welded or bolted on the rear side of a work truck. The sizes of the TMA vary but most are at least 1.5 meters wide as the purpose is to reduce the impact of an automobile collision.
Are attenuator trucks New Jersey DOT approved?
State work zone regulations often specify a minimum buffer barrier between the attenuator truck and the work area, and a minimum mass for the TMA truck, to minimize the chances that it will be pushed forward by a crash into the workers or machinery. All our Attenuator Trucks are NJ DOT Approved.
The truck-mounted Scorpion Attenuator consists of strut and cartridge sections that are linked together on a support frame. The curved side rails are corrosion resistant aluminum tubes, which offer full-width impact protection along the entire length of the unit.
What are the verdegro attenuators tested to?
The Verdegro Attenuators are tested to (NCHRP350 TL-3 & MASH TL-3) that meet all work zone safety requirements, are intended to absorb the impact of a high (or low) speed crash, decrease damage made to the vehicle, and save workers’ lives. The truck mounted attenuator (TMA) is a safety apparatus welded or bolted on the rear side of a work truck.