Table of Contents
Where is the headlight relay located?
Find the headlight relay closure: Usually, it is under the hood of the car. The point where your fuse panel is most likely located. On the other hand, it may also be located inside the cab of the car, this would be the case if your car comes with an interior fuse box.
How do you check a headlight relay?
Open the hood, locate the fuse box with the headlight relay or relays, and open it. Put your ear close to the relay and listen. Alternately, you can wedge the handle of a long screwdriver into your ear, and touch the screwdriver point to the relay. You can hear the relay click though the screwdriver like a stethoscope.
Where is the headlight fuse on Hyundai Elantra?
The fuse box is located in the instrument panel (on the driver’s side), behind the cover.
Where is the fuse box for a 2003 Hyundai Elantra?
The fuse box is located on the driver’s side of the instrument panel behind the cover.
What happens when a headlight relay goes bad?
A headlight relay will typically fail in the open position, preventing voltage from reaching the headlights. If the low beam relay fails, the low beams won’t work. Likewise, if the high beam relay fails, the high beams won’t work, and if the daytime running light (DRL) relay fails, the DRLs won’t work.
Why is my headlight not working?
Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. High beam headlights don’t work or low beams don’t work. The cause: A burned out bulb, or a problem with the high beam switch or relay.
What is PDM fuse?
Power Distribution Modules (PDM) for vehicles or commercial equipment feature multiple electrical power outputs, acceptance of many fuses, fuse types & relays and allow for custom configuration.
What is H LP fuse?
H-LP – is the headlamp relay.
How much does it cost to replace a headlight relay switch?
The average cost of replacing the headlight switch or the dimmer switch is in the range of $150-$250.
How can I tell if a relay is bad?
You want to feel and listen for any clicks. If you feel and hear clicks, the relay works on one side – the side with the energizing circuit and coil. However, if there was no sound from the horn, the relay has a problem along the contact circuit.